1. Introduction
Chemical cleaning is an important maintenance activity performed during Main CondenserCleaningInspection (MCCI) to remove deposits, scale, corrosion products, biological fouling, andothercontaminants accumulated inside condenser tubes and associated components.
The main condenser plays a critical role in a power plant by condensing exhaust steam from theturbineinto water using a cooling water system. Over time, condenser tubes may experience foulingdue tomineral deposits, corrosion products, marine organisms, and suspended solids.
These deposits reduce heat transfer efficiency, increase thermal resistance, and may cause a decreaseincondenser vacuum performance. Therefore, chemical cleaning is required when inspection resultsindicatethat conventional mechanical cleaning is insufficient or when significant deposits are identified.
2. Objectives of Chemical Cleaning
The main objectives of chemical cleaning during MCCI are:
-
Remove scale and mineral deposits from condenser tubes.
-
Eliminate corrosion products and accumulated contaminants.
-
Restore heat transfer efficiency.
-
Improve condenser performance and vacuum conditions.
-
Reduce cooling water flow restrictions.
-
Minimize the risk of under-deposit corrosion.
-
Extend condenser tube service life.
3. Types of Deposits Found in Main Condenser
During MCCI, several types of deposits may be identified inside condenser tubes.



